12
z Lead the thread from the spool and pass it
through the thread guide. Then draw it down
along the right channel.
q
Thread guide
w Right channel
x Draw the thread down along the right
channel and around the bottom of the thread
guide plate. Pull the thread up along the left
channel.
w Right channel
e Thread guide plate
r Left channel
c While holding the thread at the spool, firmly
draw the thread up and to the back of the
take-up lever. Draw the thread forward to slip
it into the eye of the take-up lever.
t Eye of the take-up lever
v Then guide it down along the left channel.
b Slide the thread from the left behind the
needle bar thread guide.
Thread the needle.
y Needle bar thread guide
n Thread the needle with the needle threader
(refer to the next page).
Raise the presser foot with the presser foot lifter
and thread in the order from
z
to
n
.
z
z
x
x
c
c
b
n
v
v
b
n
Threading the Machine
Raise the take-up lever to its highest position by
turning the handwheel toward you.
w
w
r
e
y
q
t
To Next Page
Loading...
