Janome HD1800 - Section III: Basic Sewing; Straight Stitch Sewing

17
Raise the presser foot and position the fabric
next to a stitching guide line on the needle plate.
Lower the presser foot and smooth the threads
toward the back. Depress the foot control.
Gently guide the fabric along the guide line
letting the fabric feed naturally.
For fastening the ends of seams, press the
reverse stitch button and sew several reverse
stitches.
Raise the presser foot and remove the fabric,
drawing the threads to the back.
The threads are cut the proper length for starting
the next seam.
w
q
q
Pattern selector: 10
w
Presser foot: Zigzag foot A or
straight stitch foot H
e
Thread tension: 2–6
r
Stitch length: 1.5–4
t
Stitch width: 0 or 6.5
SECTION III
BASIC SEWING
Straight Stitch Sewing
r t
e
3
5
4
*Usestraightstitchfootforexclusivelyfor
straight stitching with center needle position.