Janome JP-104 User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Janome JP-104 Specifications

General

Brand	Janome
Model	JP-104
Category	Power Tool
Language	English

Summary

For Your Safety

Safety Precautions

General safety guidelines and symbol explanations for safe machine operation.

Preface

Operation Manual Volumes

Outlines the different volumes of the operation manual and their content.

Environment

Installation Environment Guidelines

Specifies the ideal operating environment for the Electro Press, including temperature and humidity.

Installation Notice

Provides essential instructions and precautions for the proper installation of the Electro Press.

System Configuration

Stand-Alone Type

Illustrates the system configuration for the Electro Press Stand-Alone type.

Head Type

Illustrates the system configuration for the Electro Press Head type.

Unit Type

Illustrates the system configuration for the Electro Press Unit type.

Installation

Lifting and Handling

Details on how to safely lift and handle the Electro Press using eyebolts.

Setting and Mounting

Instructions for securely fixing the Electro Press to a mounting base with specified bolts and torque.

Wiring and Connections

Explains how to connect various cables for different Electro Press types.

Base Dimensions

Provides critical base dimensions for creating workpiece fixtures for the Electro Press.

Ram Mounting Jig

Guidance on designing and using ram mounting jigs for the Electro Press load cell.

Safeguard Installation

Steps for installing safety guards, such as area sensors and light curtains.

Data Management and Software

Backup Unique Number and Settings

Procedure to back up the machine's unique number and initial setting data.

Install Press System Software

Instructions for upgrading or installing the Electro Press system software.

Teaching Data Backup

Steps for backing up and retrieving teaching data for the Electro Press.