Janome JPH-1004 - User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Janome JPH-1004 Specifications

General

Type	Heat Gun
Temperature Settings	2
Air Flow Settings	2
Power Source	Electric
Air Consumption	450 l/min

Summary

1. Environment

Installation Notice and Precautions

Grounding, Wiring, and Power

Instructions for secure grounding, wiring separation, and stable power sources.

2. System Configuration

3. Installation

3-1 Lifting Procedures

Guidance on safely lifting Electro Press units with a crane.

3-2 Setting and Mounting

Detailed instructions for mounting different Electro Press models to a base.

Stand-Alone Type Mounting

Mounting specifications for JP/JPH Stand-Alone models.

Head Type Mounting

Unit Type Mounting

3-3 Wiring

Stand-Alone;Head Type Connections

Unit Type Connections

4. Backup and Install Setting Data

5. Install Press System Software

6. Teaching Data Backup