Janome JPU-1004 - User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Summary

Machine Safety and Precautions

Safety Precautions and Symbols

General Operational Warnings

Key safety warnings regarding electrical, operational, and environmental hazards.

Installation Safety Warnings

Warnings related to the safe installation and placement of the machine.

Electrical & Environmental Safety Warnings

Warnings covering electrical safety, voltage, and environmental conditions.

Operational Environment & Handling Warnings

Maintenance & Operation Awareness Warnings

Start-up & Emergency Stop Warnings

Operating Environment Guidelines

Electro Press Installation Notices

Electro Press Installation Procedures

Lifting the Electro Press

Electro Press Setting and Mounting

Wiring Diagrams and Connections

Safeguard and Area Sensor Installation

Backup and Manage Setting Data

Install Press System Software

Teaching Data Backup Procedures

Janome JPU-1004 Specifications

General

Brand	Janome
Model	JPU-1004
Category	Power Tool
Language	English