Janome JPU-3004 - User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Janome JPU-3004 Specifications

General

Brand	Janome
Model	JPU-3004
Category	Power Tool
Language	English

Summary

FOR YOUR SAFETY

Safety Precautions

General guidelines for safe operation and preventive measures against injury or damage.

Installation Safety Guidelines

Safety guidelines and warnings specifically for the installation process of the Electro Press.

Working Environment and Operation Safety

Safety rules for the working environment and during machine operation.

PREFACE

ENVIRONMENT

Installation Environment Guidelines

Recommendations for placing the machine in a suitable environment for optimal performance and safety.

Installation Notices

Instructions and precautions for installing the Electro Press, especially on automatic machines.

SYSTEM CONFIGURATION

Stand-Alone Type Configuration

Illustration and description of the Stand-Alone system configuration.

Head Type Configuration

Illustration and description of the Head type system configuration.

Unit Type Configuration

Illustration and description of the Unit type system configuration.

INSTALLATION

Lifting Procedures

Procedures and safety notes for lifting the machine using eyebolts and a crane.

Mounting and Setting Procedures

Details on how to securely mount the Electro Press to a base using specified bolts and torque.

HOW TO BACK UP UNIQUE NUMBER AND INSTALL SETTING DATA

Backing Up Unique Number and Setting Data

Procedure for backing up the machine's unique number and initial setting data.

HOW TO INSTALL PRESS SYSTEM SOFTWARE

Installing Press System Software

Steps to upgrade or install the press system software on the machine.

TEACHING DATA BACKUP

Teaching Data Backup and Retrieval

Process for backing up and retrieving teaching data for the Electro Press.