Janome JP-1504 User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Janome JP-1504 Specifications

General

Brand	Janome
Model	JP-1504
Category	Power Tool
Language	English

Summary

FOR YOUR SAFETY

Safety Precautions and Symbol Explanations

General Operational Warnings

Safety warnings related to general operation, including power, maintenance, and emergency stop accessibility.

Installation Safety Warnings

Safety warnings specific to the installation process, including interlocks and protective wear.

Operational and Environment Safety Warnings

Safety warnings covering grounding, voltage, flammable gas, and operating environment conditions.

Handling and Environmental Safety Warnings

Operation Safety and Emergency Procedures

Safety protocols during operation, including emergency stops, interference checks, and handling unusual situations.

INSTALLATION

Lifting Procedures and Eyebolt Specifications

Setting and Mounting (JP-104/204)

Instructions for fixing the JP-104/JP-204 to the mounting base with M10 bolts and torque specifications.

Setting and Mounting (JP-504/1004/1504)

Instructions for fixing JP-504/1004/1504 to the base with M10 bolts and torque specifications.

Setting and Mounting (JP-3004/5004)

Instructions for fixing JP-3004/5004 to the base with M20 bolts and torque specifications.

Setting and Mounting (JPH-104/204)

Instructions for fixing JPH-104/204 to the base with M16 bolts and torque specifications.

Setting and Mounting (JPH-504/1004)

Instructions for fixing JPH-504/1004 to the base with M16 bolts and torque specifications.

Setting and Mounting (JPH-3004/5004)

Instructions for fixing JPH-3004/5004 to the base with M24 bolts and torque specifications.

Setting and Mounting (JPU-104/204)

Instructions for fixing JPU-104/204 to the base with M10 bolts and torque specifications.

Setting and Mounting (JPU-504/1004)

Setting and Mounting (JPU-1504)

Setting and Mounting (JPU-3004/5004)

Setting and Mounting (JPU-8004)

Wiring Diagram (Stand-Alone/Head Type)

Wiring Diagram (Unit Type: JPU-104-1504)

Wiring Diagram (Unit Type: JPU-3004-8004)

Ram Mounting Jig (JP, JPH, JPU-104/204)

Ram Mounting Jig (JP, JPH, JPU-504/1004/1504)

Ram Mounting Jig (JP, JPH, JPU-3004/5004, JPU-8004)

Safeguard Installation Procedure

Area Sensor (Light Curtain) Installation

Minimum Safe Distance Calculation for Safety

HOW TO BACK UP UNIQUE NUMBER AND INSTALL SETTING DATA

HOW TO INSTALL PRESS SYSTEM SOFTWARE

TEACHING DATA BACKUP