PREFACE
The operation manual for the JANOME Electro Press consists of the following volumes.
“For Your Safety” is also provided so that the customer can make the best use of this product safely.
This section includes preventive measures that can be taken against injury to the customer or damage
to property. Please be sure to read “For Your Safety” before using this product.
Setup
This volume explains how to set up the Electro Press.
* For those who have received training in Electro Press safety and installation.
Maintenance
This volume explains Electro Press maintenance.
* For those who have received training in Electro Press safety and installation.
Teaching and
Operation
This volume lists part names and data structure as well as providing the basic
knowledge necessary to operate the Electro Press.
Operation This volume explains how to operate the Electro Press.
Specifications
This volume provides comprehensive specifications, including mechanical and
electrical requirements.
Note: The product specifications in these volumes may differ from those of the machine you have
received due to a product upgrade.
Please be sure to follow the instructions described in these volumes. Proper use of the robot will
ensure continued functionality and high performance.
These volumes are based on the standard application. Menu items may vary depending on the
model.
Be sure to shut off the power supply before plugging in the power cord.
BE SURE TO MAKE A PROPER GROUNDING WHEN YOU INSTALL THE MACHINE.
Be sure to save data whenever it is added or modified. Otherwise, changes
will not be saved if the power to the robot is cut off.
Setup Electro Press JP Series 4 viii
To Next Page
Loading...
