Janome JP-504 User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Janome JP-504 Specifications

General

Brand	Janome
Model	JP-504
Category	Power Tool
Language	English

Summary

FOR YOUR SAFETY

General Safety Precautions

Explains warning/caution symbols and general safety rules.

Installation and Operational Safety

Covers safety during installation, environment, and operation, including specific warnings.

PREFACE

Manual Volume Overview

Describes the structure and content of the manual's different volumes.

ENVIRONMENT AND CONFIGURATION

Installation Environment Requirements

Specifies suitable locations, conditions, and wiring for the machine.

System Configuration Types

Details the different machine configurations (Stand-Alone, Head, Unit).

INSTALLATION PROCEDURES

Machine Lifting and Handling

Instructions on how to safely lift and handle the Electro Press.

Machine Mounting and Setting

Details how to fix the machine to the mounting base using specific bolts and torque.

Wiring Connections

Illustrates cable connections for I/O, sensors, and peripherals for different types.

Base Dimensions

Provides dimensions for base plates for different models.

Ram Mounting Jig Specifications

Details specifications for ram mounting jigs for different models.

I/O Power Supply Switching

Explains how to switch between internal and external power supplies for I/O.

Safeguard Installation Procedures

Instructions for installing safety guards, area sensors, and related components.

SOFTWARE AND DATA MANAGEMENT

Unique Number and Setting Data Backup

Guides on backing up machine unique number and initial setting data.

System Software Installation Guide

Instructions for upgrading or installing the press system software.

Teaching Data Backup and Retrieval

Explains how to back up and retrieve teaching data using JP Designer.