Janome JP-5004 User Manual

JANOME ELECTRO PRESS
JP-104 JP-204 JP-504 JP-1004
JP-1504 JP-3004 JP-5004
JPH-104 JPH-204 JPH-504 JPH-1004
JPH-1504 JPH-3004 JPH-5004
JPU-104 JPU-204 JPU-504 JPU-1004
JPU-1504 JPU-3004 JPU-5004 JPU-8004
Operation Manual
<Setup>
“For Qualified Installer ONLY”
Thank you for purchasing the Electro Press.
*Read this manual thoroughly in order to properly use this machine.
Be sure to read “For Your Safety” before you use the machine. It
will protect you from possible dangers during operation.
*After having read this manual, keep it in a handy place so that you
or the operator can refer to it whenever necessary.

Janome JP-5004 Specifications

General

Brand	Janome
Model	JP-5004
Category	Power Tool
Language	English

Summary

FOR YOUR SAFETY

Safety Precautions

Precautions for safe use, preventing injury and property damage.

General Warnings

Critical safety instructions for operation, maintenance, and environment.

Installation Warnings

Safety guidelines for installing the Electro Press unit.

Electrical and Environmental Safety

Warnings related to grounding, voltage, and environmental conditions.

Operation Safety

Critical safety procedures to follow during machine operation.

System Configuration

Installation

3-1 Lifting - Stand-Alone/Head Type

Instructions for lifting Stand-Alone and Head type Electro Presses.

3-1 Lifting - Unit Type

Instructions for lifting Unit type Electro Presses.

3-2 Setting - JP-104/JP-204, Stand-Alone Type

Instructions for fixing JP-104/JP-204 Stand-Alone type to mounting base.

3-2 Setting - JP-504/JP-1004/JP-1504, Stand-Alone Type

Instructions for fixing JP-504/JP-1004/JP-1504 Stand-Alone type to base.

3-2 Setting - JP-3004/JP-5004, Stand-Alone Type

Instructions for fixing JP-3004/JP-5004 Stand-Alone type to base.

3-2-4 JPH-104/JPH-204, Head Type

Instructions for fixing JPH-104/JPH-204 Head type and switch box.

3-2-5 JPH-504/JPH-1004, Head Type

Instructions for fixing JPH-504/JPH-1004 Head type and switch box.

3-2-6 JPH-3004/JPH-5004, Head Type

3-2-7 JPU-104/JPU-204, Unit Type

3-2-8 JPU-504/JPU-1004, Unit Type

3-2-9 JPU-1504, Unit Type

3-2-10 JPU-3004/JPU-5004, Unit Type

3-2-11 JPU-8004, Unit Type

Wiring

Ram Mounting Jig

3-5-4 Switching I/O-SYS and I/O-1 Power Supply

Safeguard Installation

Removing Switch Box and Installing Area Sensor

Steps to remove the switch box and install the area sensor.

Area Sensor (Light Curtain) Installation

Detailed steps for installing the Area Sensor (Light Curtain).

Minimum Safe Distance Calculation

Formula and values for calculating minimum safe distance with light curtain.

Backup and Setting Data Management

Backing Up Unique Number and Initial Settings

Press System Software Installation

Upgrading Press System Software

Software Download and Installation

Teaching Data Backup