FOR YOUR SAFETY
WORKING ENVIRONMENT
Always be aware of the machine’s movement, even in the teaching mode.
Special attention will protect the operator from injury.
During operation, always have the emergency stop switch within the
operator’s reach.
For the operator’s safety, the emergency stop switch is necessary to make a
quick and safe stop in an emergency.
When you lubricate or inspect the unit, unplug the power cord from
the outlet.
Failure to do so may result in electric shock or injury.
Be sure to shut off the power supply before removing the power cord.
Warnings
Setup Electro Press JP Series 4 vi
To Next Page
Loading...
