FOR YOUR SAFETY
DURING OPERATION
During teaching, tests, and actual operation, always have the
Emergency stop switch within the operator’s reach.
For the operator’s safety, the emergency stop switch is necessary to
make a quick and safe stop in an emergency.
If anything unusual (e.g. a burning smell) occurs, stop operation and
unplug the cable immediately. Contact your dealer or the office listed
on the last page of this manual.
Continuous use without repair can cause electric shock, fire, or breakdown
of the unit.
Under no circumstances should you go inside the working area or
place your hands or head inside the working area while the machine is
operating.
When starting the machine, check that no object will interfere with the
machine’s operation.
Warnings
Setup Electro Press JP Series 4 vii
To Next Page
Loading...
