Features II JS/JSR4400N SCARA Robot
JSG GANTRY Robot
JR2000N Desktop Robot
40
Sound a Buzzer: onoffBZ
You can sound a buzzer using a point job command.
Command Category Command Parameter Job
set Output Destination (BZ) Sound a buzzer.
reset Output Destination (BZ) Stop a buzzer.
ON/OFF Output Control
onoffBZ ON Time, OFF Time Sound and stop a buzzer.
If the set or onoffBZ commands are executed, the buzzer continues to sound until the reset command
is executed.
z You can set [ON Time] and [OFF Time] for the onoffBZ command using variables or expressions.
To Next Page
Loading...
Need help?
General
