Janome JR3200 series User Manual

JANOME DESKTOP ROBOT
JR3000 Series
Thank you for purchasing this Janome Robot.
z
Before using your robot, please read this manual thoroughly
and always make sure you use the robot correctly. In
particular, be sure to thoroughly read “For Your Safety” as it
contains important safety information.
z
After reading this manual, store in a safe place that can be
easily accessed at any time by the operator.
z
This manual is written according to IEC 62079.
Original Instructions
Operation Manual
Setup
(For Installation Operators)
Installation operators are persons who have undergone installation training at
Janome or at a representative branch. People responsible for installation work should
complete this training.

Janome JR3200 series Specifications

General

Brand	Janome
Model	JR3200 series
Category	Robotics
Language	English

Summary

FOR YOUR SAFETY

Safety Symbols and Danger Levels

Auxiliary Axis and Operational Safety

Covers safety for auxiliary axes, enclosures, and pre-operation checks.

Environment, Installation, and Power Safety

Addresses safety related to environment, installation, power, and enclosures.

Electrical, Handling, and General Cautions

Details electrical safety, handling precautions, transport, and general operational cautions.

Robot Installation and Connectivity

Installation Safety and Environment

Details safety warnings and environmental conditions for robot installation.

Connectivity and Cable Management

Data Backup and Restoration

Backing Up Robot Data

Describes the procedure for creating backup data for the robot system.

Restoring Data and USB Backup

Sending and Receiving C&T Data

Robot and PC Data Transfer

Robot System Software Management

System Software Upgrade and Recovery

Settings for Operation

I/O-S Emergency Stop Configuration