Janome JR3200 series - Common to the JR3400 Series

Setup
Desktop Robot JR3000
(Rubber Feet)
(164)
502
(15.5)
551
4-
φ27
4-M8
Example: JR3403N-AC
2.3 Common to the JR3400 Series
There are four rubber feet (ϕ27).
NOTE
• The robot may rattle depending on the tool mass. If so, be sure to secure the unit. To secure th e
unit, remove the rubber feet and use the 4 M8 screw holes used for fastening the rubber feet with
spacers of a height of 20mm or more (due to protrusions).
• Use a lifter to transport the unit.
• The unit’s mass is 42kg for 3 axis specifications and 46kg for 4 axis specifications.
17