Janome JR3200 series - Attaching Devices

Setup
Desktop Robot JR3000
2.5.6 Attaching Devices
Tie up air tubes and cables using the path illustrated below as a reference.
NOTE
Make sure that each cable does not interfere with robot movements.
Cables for various
devices
Air Tube
Various Devices
Cable Tie (included)
Bundle and tie up the air
tubes, cords and cables
with the cable ties.
Cord Clamp
(included)
Fix the cord clamps in 3
places along the Y axis
according to the size of the
robot.
Z Stroke
Y Stroke
NOTE
Tie up the cables so there is no stress on them when
each of the axes run full-stroke.
Example: JR3403N-AC
27