Janome JR3200 series - Common to the JR3300 Series

Setup
Desktop Robot JR3000
(Rubber Feet)
(104)
400
(15.5)
455
4-φ27
4-M8
Example: JR3303N-AC
2.2 Common to the JR3300 Series
There are four rubber feet (ϕ27).
NOTE
• The robot may rattle depending on the tool mass. If so, be sure to secure the unit. To secure th e
unit, remove the rubber feet and use the 4 M8 screw holes used for fastening the rubber feet, with
spacers of a height of 20mm or more (due to protrusions).
• Have at least 2 people carry the unit when transporting it or use a lifter.
• The unit’s mass is 35kg for 3 axis specifications and 38kg for 4 axis specifications.
16