Janome JR3200 series - Common to the JR3200 Series

Setup
Desktop Robot JR3000
2.1 Common to the JR3200 Series
NOTE
When installing, rotate the rubber feet to adjust the height. Be sure to make them stable.
There are four rubber feet (ϕ30).
The values within the brackets above are for reference only.
NOTE
• The robot may rattle depending on the tool mass. If so, be sure to secure the unit. To s ec ure the
unit, remove the rubber feet and use the 4 M8 screw holes used for fastening the rubber feet.
• Have at least 2 people carry the unit when transporting it.
• The unit’s mass is 20kg for 3 axis specifications and 22kg for 4 axis specifications.
(40.1)
275
(3)
210
4-M8
4-φ30
(Rubber Feet)
Example: JR3203N-AC
15