Janome MB-4 - Setting Up the Machine; Installing the Machine

2
SECTION 1. SETTING UP THE MACHINE
Installing the Machine
Place the machine on a flat and stable surface such
as a sturdy table that could withstand the machine’s
weight and vibration.
Place the machine on the flat and level surface.
Make sure that all the feet firmly contact the surface.
Provide a sufficient space around the machine to
allow the hoop to move freely.
q 8.5 cm (3–3/8”)
w 20 cm (7–7/8”)
e 30 cm (11–7/8”)
q
w
e
q