⁄1
Grid size
The grid size of the editing screen can be changed by
pressing the circle key next to “+” or “–“.
You can select one of 3 sizes, 10 mm, 20 mm and
30 mm.
To hide the grid, select “OFF”.
q
Circle keys (+, –)
⁄2
Maximum sewing speed
The maximum speed of embroidery can be changed
from 400 to 800 spm by 100 spm intervals.
Press the circle key next to “+” or “–“ to select the
desired speed.
q
Circle keys (+, –)
⁄3
Hoop selection for monogramming
Press the circle key next to “+” or “–“ to select the
default hoop for monogramming from the following.
M1 to M3
T1 to T6
S1, S2, H1
J1 to J8
Refer to page 47.
q
Circle keys (+, –)
⁄4
Thread trimming position
If threads are not trimmed properly, adjust the needle
drop position where the threads being trimmed.
Press the circle key next to “+” or “–“ to set a distance
between the thread trimming position and the last
stitch of the pattern section or select
[OFF]
to turn off
the function.
q
Circle keys (+, –)
The adjustable range is from 0.5 to 1.0.
Press the OK key to register the new settings.
Or press the next page key to go to the next page.
q
q
q
⁄3
⁄2
⁄1
To Next Page
