Adjusting the Ordinary Foot Sensor
1. Press the Start-Stop and
reverse button and turn the
machine on. Wait for the
adjusting screen to appear
and then release the buttons.
2. Press the Foot UD on the
adjusting screen.
3. The screen will show H when the
presser bar is up and will show L
when the presser bar is down.
4. If an adjustment is needed, loosen the screw and move the foot
sensor switch plate left or right. Then tighten the screw. Press X on the
screen and turn off the power switch.
Press
15
To Next Page
Loading...
