18
START
STOP
Attaching the Embroidery Hoop to the Machine
Turn the attaching knob so it is parallel with the hoop,
and set it on the carriage.
Attach the hoop by fitting the pins into the carriage
holes.
q Attaching knob
w Carriage holes
e Pins
Turn the attaching knob clockwise.
CAUTION:
Always provide sufficient clearance for the embroidery
carriage behind your machine before starting the
machine.
Never try to move the carriage by hand or touch the
carriage while it is moving.
Make sure to return the carriage to the home position
before turning the power off.
q
w
e
q
To Next Page
Loading...
