35
OPTIONAL ITEMS
PC Cards (optional item)
Inserting and ejecting a PC card
Insert the PC card into the slot with the front side facing
toward you.
Push the card in until it clicks, the eject button will pop
out.
q PC card
w Eject button
NOTE:
When the card is properly set, the red bar on the eject
button will show.
Ejecting the PC card
Press the Eject Button to eject the PC card.
Take out the PC card from the machine.
NOTE:
When the power is turned on with a PC card inserted in
the machine, it will take a few moments to get the
machine booted up.
Selecting the PC card designs
Press the PC card tab. The designs contained in the
card are displayed on the pattern selection keys.
Press the Pattern selection key to select the design
you wish to sew.
The Ready to Sew screen will appear.
CAUTION:
Do not turn the power off or eject the card while the
warning sign or hourglass is displayed.
A Z
PC Card
Hoop Size A(F):126x110mm
Mode
2
1
3
4
q
w
w
To Next Page
Loading...
