Janome Memory Craft 550E - Programming a Monogram

20
v Push the inner hoop and fabric into the outer hoop.
Turn the outer hoop levers halfway (in the direction of
arrow) and turn the hoop tightening screws with your
ngers.
e Outer hoop lever
r Inner hoop
y Hoop tightening screw
u Outer hoop
c Lay the inner hoop and template on the fabric,
matching the centerlines of the fabric with the
template.
r Inner hoop
t Template
When using hoop RE36b
z Prepare a fabric and attach a stabilizer to the wrong
side of the fabric.
The fabric and stabilizer should be larger than the
hoop size.
Draw the centerlines on the fabric with tailor’s chalk.
q Fabric
w Centerlines
q
w
t
r
u
x Turn the outer hoop levers in the direction of arrow
and remove the inner hoop.
e Outer hoop lever
r Inner hoop
z
c
v
x
r
e
e
r
e
e
y
y