15
Threading the Machine (continued)
b Draw the thread down and around the tension
dial from the right to the left. While holdin the
thread beside the left thread guide, pull the thread
up to insert it between the tension disks and
under the loop of the check spring.
Be sure that the thread is coming out from
notch of the disk.
5 Check Spring
6 Notch
n Firmly draw the thread up to the take-up lever
and down into its eye from the right to the left,
while holding the thread beside the left thread
guide.
7 Eye of the Thread Take-up Lever
m Draw the thread down through the lower thread
guide from the right.
8 Lower Thread Guide
, Slip the thread behind the needle bar thread
guide on the left.
9 Needle Bar Thread Guide
. Thread the needle from front to back by hand or
use the automatic needle threader.
8
9
b
6
5
n
7
m
,
.
Janome MC6300 Instruction Manual
Janome Professional Sewing Machine
MC6300 Owners Manual/ User Guide
To Next Page
Loading...
