16
Automatic Needle Threader
Raise the needle to its highest position by
pressing the up/down needle button twice.
Turn the power switch off.
Lower the presser foot.
z Depress the needle threader knob as far as it will go.
The hook comes out through the needle eye from
behind.
1 Needle Threader Knob
2 Hook
x Draw the thread down around the threader guide and
under the hook.
3 Threader Guide
c Release the threader knob slowly while holding the
thread end with your hand. A loop of the thread is pulled
up through the needle eye.
4 Loop of Thread
v Remove the loop from the threader and pull out
the thread end from the needle eye.
NOTES:
The automatic threader works well with the threads
#50-90 and needles #11-16, including the blue tipped
needle.
The automatic needle threader cannot be used for
threading the twin needle.
If the hook fails to pull a loop of the thread, check the
needle and its setting.
1
2
3
2
4
z
x
c
v
Janome MC6300 Instruction Manual
Janome Professional Sewing Machine
MC6300 Owners Manual/ User Guide
To Next Page
Loading...
