62
Replacing the Light Bulb
WARNING:
Turn the power off before replacing the light bulb.
The bulb could be HOT, wait until it has cooled down
before touching it.
To remove:
Remove the setscrew.
Remove the faceplate.
Swing the lamp socket to the left and pull out the bulb.
To replace:
Insert a new bulb into the opening of the socket.
Return the lamp socket to the original position.
Attach the faceplate with the setscrew.
1 Setscrew
2 Faceplate
3 Lamp Socket
4 Light Bulb
Replace a bulb with the same type, rated 12 V, 5 W.
1
2
3
4
Janome MC6300 Instruction Manual
Janome Professional Sewing Machine
MC6300 Owners Manual/ User Guide
To Next Page
Loading...
