64
The power is turned on again after auto thread
cutting has been interrupted.
The presser foot is raised before auto thread
cutting is completed.
Press the Thread cutter button
to finish auto thread cutting.
pip Normal operation
pip-pip-pip Invalid operation or malfunction
pip-pip-peep Buttonhole sewing is finished.
Warning Sign Cause Try this
Audible Signal
The Buzzer Sounds when:
LED blinks
The power is turned on with the needle in the
down position.
Press the up/down needle button
to raise the needle.
LED blinks
Janome MC6300 Instruction Manual
Janome Professional Sewing Machine
MC6300 Owners Manual/ User Guide
To Next Page
Loading...
