Why does the bobbin thread keep breaking on my Janome MyStyle 100 Sewing Machine?
The bobbin thread may be breaking in your Janome Sewing Machine because: * The bobbin thread is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and does not turn smoothly; in this case, replace the bobbin. * The thread is wound loosely on the bobbin; re-wind the bobbin to fix this.
Why does my Janome MyStyle 100 not work?
If your Janome Sewing Machine does not work, check if: * The machine is not plugged in. * Thread is caught in the hook race. * The handwheel is pulled for bobbin winding.
Why does the needle thread break on my Janome MyStyle 100 Sewing Machine?
The needle thread may be breaking due to several reasons: * The needle thread might not be threaded properly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be incorrectly inserted. * The needle thread and the bobbin thread might not be drawn to the rear and set properly under the presser foot when starting sewing. * The fabric might not be drawn to the rear when sewing is finished. * The thread might be too heavy or too fine for the needle.
Why is there seam puckering when I sew with my Janome MyStyle 100 Sewing Machine?
Seam puckering with your Janome Sewing Machine may happen because: * The needle thread tension is too tight. * The needle thread is not threaded properly. * The needle is too heavy for the fabric being sewn. * The stitch length is too long for the fabric; try making the stitch shorter.
General| Brand | Janome |
|---|---|
| Model | MyStyle 100 |
| Category | Sewing Machine |
| Language | English |
To Next Page
