Janome OC 6260 User Manual (English)

Questions and Answers:

B
Brandon WalkerAug 14, 2025
Why does the needle thread break on my Janome OC 6260?
- M
  mendozarobertAug 15, 2025
  The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle thread and the bobbin thread are not set under the presser foot when starting to sew. * The threads were not drawn to the rear after sewing. * The thread is too heavy or too fine for the needle.
L
Luis LawsonAug 18, 2025
What to do if my Janome Sewing Machine skips stitches?
- T
  Thomas SpearsAug 18, 2025
  Skipped stitches can occur in your Janome Sewing Machine if: * The needle is incorrectly inserted, bent, or blunt. * The needle and/or threads are not suitable for the work being sewn. * The blue tipped needle is not being used for sewing stretch, very fine fabrics, and synthetics. * The needle thread is not threaded properly. * A poor quality needle is used. Change the needle.
M
Michael GarciaAug 21, 2025
Why is my Janome OC 6260 so noisy?
- J
  justinhillAug 21, 2025
  Your Janome sewing machine might be noisy because thread has been caught in the hook race, or lint has built up in the hook race or bobbin holder.
S
Sarah CooperAug 25, 2025
Why does the bobbin thread break on my Janome OC 6260?
- D
  dmillerAug 25, 2025
  The bobbin thread may break if it is not threaded properly in the bobbin holder, lint has collected in the bobbin holder, or the bobbin is damaged and doesn’t turn smoothly. If the bobbin is damaged, change it.
R
Ronald StephensonAug 28, 2025
What to do if my Janome OC 6260 Sewing Machine doesn’t work?
- L
  Laura HillAug 28, 2025
  Your Janome sewing machine may not work if it is not plugged in, thread has been caught in the hook race, or the bobbin winder spindle is not returned to the left after bobbin winding.
B
Benjamin AllenAug 31, 2025
What causes seam puckering on my Janome OC 6260 Sewing Machine?
- M
  Michael GallagherAug 31, 2025
  Seam puckering may occur if the needle thread tension is too tight, the needle thread is not threaded properly, the needle is too heavy for the fabric being sewn, or the stitch length is too long for the fabric. To resolve this, make the stitch shorter.
E
emma17Sep 3, 2025
Why is the cloth not feeding smoothly through my Janome OC 6260?
- T
  Tamara ParrishSep 4, 2025
  The cloth may not feed smoothly if the feed dog is packed with lint, the stitches are too fine (make stitch longer), or the feed dog is not raised after “drop feed” sewing.
K
Katie SmithSep 7, 2025
Why are there loops on the seams of my Janome Sewing Machine?
- A
  Abigail BoydSep 7, 2025
  Loops on the seams can be caused by the needle thread tension being too loose, or the needle being too thick or too fine for the fabric.
J
jamiepriceSep 10, 2025
Why is buttonhole sewing not sewn properly on my Janome Sewing Machine?
- C
  Charles RogersSep 10, 2025
  Buttonhole sewing may not be sewn properly if the stitch density is not suitable for the fabric being sewn, or the suitable interface material has not been used for the stretch or synthetic fabric.