Janome OC 6260 - Sewing Application and Decorative Stitches; Appliqué; Quilting

39
SEWING APPLICATION AND DECORATIVE STITCHES
9
0
Auto
1
2
3
25
4
1
2
3
9
0
Auto
01
4
1
2
2
1
3
Appliqué
Machine setting
Pattern #25
Foot F: Satin stitch foot
Thread tension Auto
Foot pressure 2
The patterns #05 and #26 can also be used.
Baste or glue appliqué pieces on the fabric.
Stitch around the appliqué making sure the needle falls
along the outer edge of the appliqué.
When turning corners, lower the needle down into the
outer edge of the appliqué, and raise the presser foot to
pivot the fabric.
Appliqué
Outer edge
NOTE: Return the foot pressure dial to “ 3 ” after
appliqué sewing is finished.
Quilting
Machine setting
Pattern #01
Foot A: Zigzag foot
Thread tension Auto
L: Quilting bar
Insert the quilting bar into the opening on the back of the
foot holder.
Shift the quilting bar to the desired position.
Sew tracing the previous seam with the quilting bar to
keep constant seam spacing.
Quilting bar
Opening
Seam spacing
2
3
1
4
2
3
1
4
1
2
1
2
3