What to do if my Janome Professional Sewing Machine is skipping stitches?
Skipped stitches can occur for a few reasons: * The needle may not be set correctly. * The needle might be bent or blunt, requiring replacement. * The tension could be out of balance. * The machine may not be threaded correctly. Re-set the needle; adjust the tension and refer to the correct threading path.
Why does the needle thread keep breaking on my Janome Sewing Machine?
The needle thread may break due to several reasons: * The machine might not be threaded correctly. * The thread tension could be too tight. * The needle might be bent or blunt and needs replacement. * The needle might not be set correctly. * You might be using the wrong type of needle. Please, use the correct type of needle and refer to the correct threading path; adjust the thread tension and re-set the needle.
What to do if my Janome Professional Sewing Machine does not operate?
If your machine isn't operating, check these potential causes: * The machine may not be connected to the power supply; connect it properly. * The foot control might not be plugged in firmly; ensure it is securely plugged in.
Why is the needle bending or breaking on my Janome Professional Sewing Machine?
A needle can bend or break due to these reasons: * The needle may be bent or blunt. * The needle might not be set correctly. * The needle clamp screw could be loose. * The fabric is being forcefully pulled. Replace the needle, re-set the needle, tighten the needle clamp screw, and avoid pulling the fabric.
General| Brand | Janome |
|---|---|
| Model | Professional Series |
| Category | Sewing Machine |
| Language | English |
Warning about the risk of electric shock and immediate actions.
General safety precautions to prevent burns, fire, shock, or injury.
Step-by-step guide for threading all needles correctly.
Instructions for threading the looper for various stitches.
Guides on setting and balancing thread tensions for different stitches.
Common causes and solutions for needle thread breaking.
Troubleshooting steps for bent or broken needles.
Solutions for when the sewing machine does not power on or function.
To Next Page