Janome Professional Series - CARE of YOUR MACHINE Cleaning the Feed Dogs and Looper Area

46
5
1
2
3
4
q
w
e
e
r
CARE OF YOUR MACHINE
Cleaning the Feed Dogs and Looper Area
WARNING:
Turn the power switch off and unplug the machine
before cleaning.
NOTE:
Do not dismantle the machine in any way other than
what is explained in this section.
z
Remove the presser foot and needles.
x
Remove the setscrew and needle plate.
c
Clean the feed dogs with a lint brush.
q
Setscrew
w
Needle plate
e
Lint brush
v
Open the looper cover and clean the looper and
surrounding area with the lint brush.
b
Replace the needle plate, needles and presser foot.
Close the looper cover.
r
Looper cover