CONTENTS
Pages
TO CHANGE BELT COVER 1
TO CHANGE BASE 1
TO CHANGE BED COVER 1
TO CHANGE TOP COVER 2
TO CHANGE CONTROL PANEL 3
TO ADJUST PRESSER BAR HEIGHT 4
TO ADJUST TIMING OF LATERAL NEEDLE SWING 5
TO ADJUST NEEDLE DROP POSITION IN NEEDLE HOLE 6
TO ADJUST CLEARANCE BETWEEN NEEDLE AND ROTARY HOOK 7
TO ADJUST HOOK TIMING 8
TO ADJUST NEEDLE BAR HEIGHT 9
TO ADJUST FEED DOG HEIGHT 10
TO ADJUST ZERO FEEDING 11
TO ADJUST STRETCH STITCH FEED BALANCE 12
TO ADJUST BUTTONHOLE FEED BALANCE 13
To Next Page
Loading...
