To Next Page
J
Justin NixonAug 25, 2025
Why is my Janome Sewing Machine so noisy?
- JJennifer PenaAug 26, 2025
Your Janome Sewing Machine might be noisy if: * There is thread caught in the bobbin holder. * Lint has built up in the bobbin holder.
Why is my Janome Sewing Machine so noisy?
Your Janome Sewing Machine might be noisy if: * There is thread caught in the bobbin holder. * Lint has built up in the bobbin holder.
Why is the fabric not feeding through my Janome ?
If the fabric isn't feeding through your Janome Sewing Machine, it may be because the fabric is too thick.
Why does the needle thread break on my Janome Sewing Machine?
The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle thread and the bobbin thread are not set under the presser foot when starting to sew. * The threads were not drawn to the rear after sewing. * The thread is either too heavy or too fine for the needle.
Why does the bobbin thread break on my Janome ?
The bobbin thread may break due to: * The bobbin thread not being threaded properly in the bobbin holder. * Lint having collected in the bobbin holder. * The bobbin being damaged and not turning smoothly; in this case, replace the bobbin. * The thread being wound loosely on a bobbin.
Why does my Janome Sewing Machine keep skipping stitches?
Skipped stitches can occur for several reasons: * The needle is incorrectly inserted. * The needle is bent or blunt. * The needle and/or threads are not suitable for the work being sewn. * A blue needle is not being used for sewing stretch, very fine fabrics and synthetics. * The needle thread is not threaded properly. * The wrong needle is being used; in this case you should change the needle.
Why is my Janome Sewing Machine making so much noise?
Noisy operation of your Janome sewing machine may occur if: * There is thread caught in the hook race. * Lint has built up in the shuttle or the shuttle race.
What should I do if my Janome Sewing Machine doesn't work?
If your Janome sewing machine isn't working, check the following: * Ensure the machine is plugged in. * Check if a thread is caught in the shuttle race. * Verify the clutch is engaged.
Why my Janome Sewing Machine does not work?
Your machine may not be working because: * It is not plugged in. * A thread is caught in the hook race. * The clutch knob is pulled away for bobbin winding. * The bobbin winder spindle is in the winding position.
Why does my Janome Sewing Machine needle thread keep breaking?
The needle thread may break due to several reasons: * The needle thread might not be threaded properly. * The needle thread tension may be too tight. * The needle could be bent or blunt. * The needle might not be inserted properly. * The stitch density may be too dense; in this case, modify the pattern using embroidery software. * You might be using poor-quality threads; switch to high-quality threads. * The bobbin thread might not be threaded properly.
What to do if my Janome Sewing Machine is not running?
If your machine isn't running, consider the following possibilities: * The machine may not be plugged in correctly. * Threads might be jammed in the hook or around the take-up lever; follow the message to turn it off. * A confirmation or error message might be displayed; in this case, turn the power off and on again. * The control system might not be working correctly.
General| Brand | Janome |
|---|---|
| Model | Sewing Machine |
| Category | Sewing Machine |
| Language | English |
