Jasco J-1100 - Installing the Modulation Element

12
2.2.2 Installing the modulation element
The modulation element is removed from the main unit prior to shipment to prevent damage
from occurring during transit. Install the modulator element in the main unit after installing the
main unit.
(1) Remove the amplifier unit cover from the main unit.
Setscrew
Setscrew
Setscrew (Side)
Lift
Amplifier unit cover
Figure 2.4 Removing the amplifier unit cover (Model J-1100)
Setscrew
Pull
Amplifier unit cover
Figure 2.5 Removing the amplifier unit cover (Model J-1500)