Jasco J-1100 User Manual

iii
3) Warning for FUSE and GROUND (No.3 of Figure 2, Figure 3 and Figure4)
Only use fuses of the designated rating to protect both operator and instrument from fire and
other hazards. Before replacing a fuse, be sure to turn OFF the "POWER" switch and
unplug the cable from the power outlet to avoid the risk of electric shock.
Be sure to ground the mains plug ground pin. If the instrument is operated without being
properly grounded, you run the risk of electric shock.
Do not use water supply pipes made of nonconductive material for grounding. For safety
reasons, do not use gas piping for grounding.
4) The crossed-out wheeled trash bin WEEE Label (No.3 of Figure 2, Figure
3 and Figure4)
This symbol [crossed-out wheeled trash bin WEEE] indicates separate collection of waste
electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the disposal of this
product.
1
2
3
Figure 2 Warning indications of Model J-1100 CD spectrometer

Jasco J-1100 Specifications

General

Brand	Jasco
Model	J-1100
Category	Measuring Instruments
Language	English