Instruction Manual FS140 and FS100 - 6115... / 6116...
© BA_FS140+100_EN_Rev02-2010.doc Page 15 of 20
10 Ordering spare parts
Send orders for spare parts by email to verkauf@jaudt.de or by fax to ++ 49 (0)821 7960567.
If you have a JAUDT customer number you can also order spare parts via the website at www.jaudt.de.
Please give us the following information when ordering spare parts:
Name, item and article number from the spare parts list (appendix)
Order no. and type of JAUDT slide valve as specified on the type plate.
Example:
You need e.g. a new slide plate. We need the following details:
Slide plate, item 20
Order no. according to nameplate, e.g. 208-1234
Type according to nameplate, e.g. 208-1234.10
11 Troubleshooting
Slide plate leaking outwards
Packing glands worn
Packing glands not leak-tight
Slide plate worn or affected by
caked-on materials
Improper use
Replace packing glands
Tighten packing glands
Clean or replace slide plate
Check working conditions (e.g.
pressure and temperature)
Leak in opening on slide plate
Caking on slide plate or housing
Seal in opening worn (where
fitted)
Improper use
Clean
Fit new seal
Check working conditions (e.g.
pressure and temperature)
Slide plate jerking or not
moving
Caking on slide plate incl. guides
or in housing
Packing glands worn or subject to
excessive tension
Drive or power supply and control
unit defective
Clean
Replace or adjust packing
gland
Check and repair
Pulse generator not emitting
any signals
Pulse generator defective
Loose actuating element or
incorrect setting of pulse
generator
End positions are not being
reached
Renew
Check and adjust
Remove caking or foreign
bodies; check drive and power
supply
To Next Page
Loading...
Need help?
General
