EasyManuals Logo

Jayco Swift User Manual

Jayco Swift
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image

17
 It will not func-
tion if the battery is missing, disconnected, dead, the wrong type or not installed correctly.
    Refer to the users guide, for correct battery and
installation information,
 When the production of
combustion is sensed, the smoke detector sounds a loud alarm that continues until the air is
cleared. The LED light will also give a visual indication of a sounding alarm.

This warning should last for 30 days. You  replace the battery once the
alarms low battery warning (beep) starts to assure continued protection.
When the battery is removed from the alarm, the battery ag will pop up; the alarm cannot
be installed to the mounting bracket without a battery.
 stand at arm’s length from the smoke alarm as the alarm horn is loud and may be
harmful to your hearing. The test button will accurately test all functions. Never use an
open ame to test the smoke alarm.
        


Silence Feature: Silences nuisance alarms
Hinged cover allows for easy battery replacement
Lighted Power and Alarm Indicator. LED indi-
cates battery is connected.
Test/Silence button – One touch button combines both features
Low Battery indicator – Beeping signal indicates low battery.

Vacuum o any dust on the cover of the smoke alarm using a soft brush attachment. Test the
smoke alarm once you have vacuumed. Never use water, cleaners or solvents to clean the
smoke alarm as they may damage the alarm. Do not paint the smoke alarm.
Refer to and follow detailed safety, testing, troubleshooting and maintenance information
found in the manufacturers user pamphlet located in your warranty packet.
Special
alarms with ashing strobe lights are recommended for the hearing im-
paired
Only use the replacement battery recommended by the smoke detector
manufacturer. The smoke detector alarm may not operate properly with
other batteries. Never use a rechargeable battery as it may not provide a
constant charge. Never disconnect the battery to silence the alarm.
Test the smoke alarm operation after the vehicle has been in storage,
before each trip and at least once per week during use. Do not disconnect
the battery or the alarm.

Table of Contents
Maintenance Record

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jayco Swift and is the answer not in the manual?

Jayco Swift Specifications

General IconGeneral
Seatbelts4
Fuel TypeDiesel
ShowerYes
ToiletYes
CategoryMotorhomes
Gross Vehicle Mass3500kg
TransmissionAutomatic

Related product manuals