60
Because the container is not removable, the mo-
torhome will need to be driven to a qualied pro-
pane facility for servicing or lling.
Only the authorized gas service technician(s)
should be near the motorhome while the propane
tank is being lled. The new propane container
must be carefully purged for proper appliance
performance and operation. The propane tank
must
Replace all protective covers and caps on the
propane system and/or container after lling.
Make sure the valve is closed and the compartment door is securely latched.
Never allow your propane tank to be lled above the maximum safe level as indicated by
the xed liquid level gauge.
Do not allow the visible gauge to be used for lling. Overlling the propane container above
the liquid capacity indicated on the container, could allow liquid propane to enter the system
that is designed for vapor only creating a hazardous condition.
The following warming label has been placed by the propane container.
The regulator has the only moving components in the propane system. Its sole function is
to reduce the pressure from the propane containers to a safe and consistent low operating
pressure. . If the pressure is too high, it aects performance and safety; if the pressure is too
low, your appliances will not operate correctly.
Contact your dealer or qualied propane service technician for optimum performance (this
adjustment should always be made with a properly calibrated manometer).
Refer to your Warranty Packet for more information on the LP gas system components.
Do not smoke and do not
operate other ignition sources while refueling.
and the P.O.L. connection, install the P.O.L. plastic cap that is at-
tached to the container.
Do not attempt to service a propane container overll yourself.
To Next Page
Loading...
