24
The upper portion of this yellow label is federally
required and indicates the total combined weight
value of occupants and cargo that may be placed in
or on your motorhome as it was manufactured and
weighed before leaving the factory.
This label also indicates the number of safety seat
belts that have been installed at the factory. Addi-
tions or other changes made to the motorhome after
it left the factory will aect (reduce) the OCCC.
The lower portion of the label is provided voluntari-
ly and indicates the weight value of the motorhome
as it was manufactured and weighed before leaving
the factory. This label also indicates the GCWR of
the completed motorhome.
Required by the government to verify the RV complies with all motor vehicle standards for
Canada and the United States. It includes the following information: Manufacturer name,
VIN and the date.
is located on the rear bumper above the hitch
receiver. Be sure to read and follow the guidelines and information stated on this label.
Refer to the Chassis Guide for additional information.
To Next Page
Loading...
Need help?
General
