PLACE THE UNIT
Find a smooth and flat surface on the dashboard in front of you that
is within easy reach but will not interfere with driving. The built-in
microphone is housed in the button so it should be as close to your
mouth and as directly in front of you as possible. See image for some
recommended areas:
1. Make sure the surface is dry and free of dirt.
2. Attach the back side of CLUSTER TALK2 on the dashboard.
3. Direct connect from 3.5mm to an auxiliary input.
4. Put the USB cable to USB charger.
5. Turn on the car stereo and enter to the AUX mode.
INSTALLATION
27
KO
EN
To Next Page
Loading...
