JB.lab ClusterTALK2 - Calling

CALLING
33
CALLING
Check the following before operating the unit.
1. The Bluetooth function is active on the mobile phone. 2. Pairing of this unit and the Bluetooth mobile phone is complete.
* Not all mobile phones support all functions listed above. Please refer to your mobile phone’s user’s manual for further information.
* When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You have to transfer the call to
CLUSTER TALK2 manually then. Please refer to your mobile phone’s user’s manual for further information.
* For some mobile phones, there maybe some echo when making a call. Please adjust the volume or the angle of CLUSTER TALK2.
OPERATION
Short press Button once
Press and hold Button for about 1 seconds
Short press Button once
Double click Button
Press and hold Button for about 3 seconds
Press and hold Button for about 5 seconds
Short press Button twice
Press and hold Button for about 1 seconds
Press and hold Button for about 1 seconds
FUNCTION
ANSWER A CALL
REJECT A CALL
END A CALL
MUTE
REDIAL
VOICE DIAL
END CURRENT CALL AND ANSWER A NEW INCOMING CALL
KEEP CURRENT CALL AND ANSWER A NEW INCOMING CALL
END CURRENT CALL AND SWITCH TO THE CALL TO BE KEPT
KO
EN