Every time CLUSTER TALK2 is turned on, it will connect to last connected
devices automatically. If you want to pair it with other devices, please
turn off the Bluetooth function of current Bluetooth device paired with
CLUSTER TALK2 first and then pair CLUSTER TALK2 with a new device
according to steps 1-6 mentioned above.
RECONNECTING YOUR DEVICE
If you move out of range or turn off the Bluetooth feature on
your Bluetooth mobile phone, the CLUSTER TALK2 will discon-
nect from your device. To reconnect, simply access the Bluetooth
Manager on your device and select the appropriate “CLUSTER
TALK2” listed. You will not be asked to enter the PIN code again.
CHANGING CONNECTED DEVICE
If you want to switch from one device to another, follow these steps:
1. End the existing Bluetooth connection with the connected device. Access
the Bluetooth Manager and disable the Bluetooth function of the Bluetooth
mobile phone.
2. CLUSTER TALK2 can now be connected to a different Bluetooth mobile
phone.
3. Follow the directions in “Connecting To A Bluetooth Device” to connect
a different device.
OUT OF RANGE OR LOST SIGNAL
If the music device is out of range (beyond 30 feet) of the CLUS-
TER TALK2 or if there is something blocking the Bluetooth signal,
the LED light will turn off to indicate that the Bluetooth connec-
tion with the music device has been lost. To avoid a lost con-
nection:
1. Move the music device back into range (within 30 feet), and/or make sure
there’s a clear line of sight and that there are no obstructions between the
CLUSTER TALK2 and the Bluetooth mobile phone.
2. Within 15 seconds, the connection will automatically be reestablished and
the blue LED light will turn on.
3. If the connection is lost for more than 15 seconds, the connection will need
to be reestablished. Follow the directions in “Reconnecting Your Device”.
PAIRING / CONNECTING
30
KO
EN
To Next Page
Loading...