Transducer Repair
12
Repair Kits
Part Number Description
C8REON15 LF Cone Replacement Kit, EON15
C2REON15P LF Cone Replacement Kit, EON15P, EON15P-1/230
31385-03 Dust Dome, EON15, EON15P, EON15P-1/230 EON15PAK
D8R2418 HF Diaphragm Replacement Kit, EON15,
EON Power15, EON15P-1/230 (2418H) (315436-001X)
C2REONSUB LF Cone Replacement Kit, EON PowerSub
C8REON10-G2 LF Cone Replacement Kit, EON10
C4REON10P LF Cone Replacement Kit, Power10
No repair kit is available for the 2412H Compression Driver. Entire driver should
be replaced (P/N 125-10000-00X).
No Repair Kit is available for the M115-8 woofer. Entire driver should be replaced (124-
67001-00X)
NOTE:
To recone the EON woofers, it is not necessary to disassemble
the enclosure.The woofer can be reconed from the front.
Tools and Supplies
The following items will be required to properly recone the speaker:
Screwdriver
Long-Nose Pliers
Masking Tape
MEK
Utility Knife
Teflon or Orange Stick
Gap Gauges – 0.089" (15" models only - JBL P/N 90075-.089)
0.080" (10" models only - JBL P/N 90075-.080)
An audio function generator is also required for testing purposes.
The entire recone process uses 3M 1300L adhesive. A tube is included with the recone kit.
Additional adhesive may be ordered from JBL, either by the tube (P/N 71715), or by the
quart (P/N 63376).
Cone Replacement Procedure