To Next Page

To Previous Page

4 Technical Specifications

4.1 Audio Amplifier Section

Set all additional processing (tone controls, equalizers, audio effects, etc) to native or bypass, Set Unit on

Test mode

, set digital generator dither off if not additionally defined. Tweeter output resistive load = 6Ω, 2

channels loaded;Woofer output resistive load = 3Ω, 1 channel loaded. All voltage measurements are made

with RMS detector,1kHz signal,10Hz~22kHz BW, unless otherwise specified.

4.1.1 Speaker Output(Aux_in and BT/USB)

Description

Specification

Rated Output Power with 1% THD

Woofer 30W x 1 tweeter 10W x2 with AC mode

Woofer

15W x1 tweeter 5W x2 with Battery mode

(

Woofer or Tweeter drive when measure power, Woofer

@1kHz,Tweeter @10kHz, time > 1 minute )

Rated Output Power with 5% THD

Woofer 40W x 1 tweeter 15W x2 with AC mode

( Woofer or Tweeter

drive when measure power, Woofer

@1kHz,Tweeter @10kHz, time > 1 minute )

Input Sensitivity

Analog 3.5mm aux_in : 370mV +/- 10%;

Digital

: -9dBFS +/- 1dB

Measure at 1KHz

Analog Input Overload

3.5mm Aux_in: 1 Vrms

Frequency Response (Output Power:-3dB

ROP)

Woofer :20Hz to 5KHz +/- 1dB (EQ setting is disable,Low-pass

filter to save DSP resource)

Tweeter :

1kHz to 19.5KHz +/- 1dB (Hi-

pass filter to protect spk)

(BT mode : high frequency up to 19KHz)

Frequency Response (Output Power and

THD+N) with EQ setting

TBD

THD+N at 1W

<0.5 %

THD+N at Rated Output Power

<1%

Signal-to-Noise ratio at Rated Output Power

80dB (A-Weighted)

Channel Separation(EQ setting is disable)

40dB@100Hz

dB @1KHz

40dB @10KHz

Function Crosstalk

75dB@100Hz

dB @1KHz

dB @10KHz

Dynamic range

85dB@1KHz

Input Impedance

>4 Kohm for 3.5mm Aux input

Residual Noise

1.2mV rms

DC Offset

<30mV

Damping Factor

>10

Questions and Answers:

Need help?

Do you have a question about the JBL Partybox On-The-Go and is the answer not in the manual?

JBL Partybox On-The-Go Specifications

General

Wi-Fi	No
AUX in	Yes
Bluetooth range	10 m
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Product type	-
Product color	Black
Product design	Rectangle
Volume control	Rotary
Battery type	Built-in battery
Battery capacity	2500 mAh
Battery life (max)	6 h
AC adapter frequency	50/60 Hz
Battery recharge time	3.5 h
AC adapter input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Frequency range	50 - 20000 Hz
RMS rated power	100 W
Signal-to-Noise Ratio (SNR)	80 dB
Cables included	AC
Quantity per pack	2 pc(s)
Package depth	314 mm
Package width	600 mm
Package height	367 mm
Package weight	10150 g
Woofer diameter (imperial)	5.25 \
Tweeter diameter (imperial)	1.75 \
Recommended usage	Universal