EasyManua.ls Logo

JBL PRX500 - Page 15

JBL PRX500
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
System Type:
Self powered dual 15", two-way, bass-reflex
Frequency Range (-10 dB):
40 Hz - 20 kHz (EQ in flat position)
Frequency Response (±3 dB):
52 Hz - 20 kHz (EQ in flat position)
Coverage Pattern:
70º x 70º nominal
Directivity Index (DI):
10.3 dB
Directivity Factor (Q):
10.8
Crossover Modes:
DSP controlled 48 dB filter slope
Crossover Frequency:
1.6kHz
System Power Rating
650 W continuous, 1300 W peak
LF Power amp:
Class-D, 275 Watt (continuous) at driver impedance
LF2 Power amp:
Class-D, 275 Watt (continuous) at driver impedance
HF Power amp:
Class-D, 100 Watt (continuous) at driver impedance
Distortion:
Less than 0.1% at rated power
Maximum Peak Output:
135 dB
Signal indicators:
Overload: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Input sensitivity range:
Mic position: -25 dBu to 0 dBu
Line position: +10 dBu to +28 dBu
Input Impedance:
64 K Ohms (balanced), 32 K Ohms (unbalanced)
EQ:
Presets for Flat or Boost
LF Driver:
2 x JBL 265F 380 mm (15 in) Differential Drive
®
woofer
HF Driver:
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
Enclosure:
Trapezoidal, 18 mm, plywood with polypropylene end caps
Transport:
2 x die-cast handles with backing cup
Finish:
Anthracite DuraFlex™ finish
Grille:
Powder coated, Anthracite, 18 gauge perforated steel
with acoustical transparent black foam backing
Input Connectors:
Balanced XLR / 1/4 inch combo jack with XLR loop through
Dimensions (H x W x D):
1300 mm x 440 mm x 465mm
(51 in x 17.25 in x 18.25 in)
Net Weight:
38 kg (84 lb.)
PRX525

Related product manuals