EasyManua.ls Logo

JBL SUB10 - Page 5

JBL SUB10
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Paramete
r
Specification Unit QA Test Limit
s
Conditions Notes
Power on Delay time 3 sec.
functional AC Power Applied
Transients/Pops
ATO Transient 5 mV-peak
10 @ Speaker Outputs
Turn-on Transient 50 mV-peak
100 @ Speaker Outputs AC Line cycled from OFF to ON
Turn-off Transient 50 mV-peak
100 @ Speaker Outputs AC Line cycled from ON to OFF
Efficiency
Stand-by Input Power 14 Watts
16 @ nom. line voltage
Maximum allowable input power under
nominal Input voltage and frequency, HOT
or COLD operation.
Power Cons.@rated power 230 Watts
240 @ nom. line voltage
140 Watts @ 4 Ohms nominal line voltage
Protection
Short Circuit Protection YES --
functional Direct short at output
Thermal Protection 65 deg. C --
functional @1/8 max unclipped Power
Temperature rise should not exceed 35K
rise
DC Offset Protection YES --
functional DC present at Speaker Out leads Relay or crowbar (for driver/fire protection)
Line Fuse Rating
US Version 3.15 Amps
Type-T or Slo Blo, T3.15A, 250V External fuse with UL/SEMKO rated holder
EU Version 1.6 Amps
Type-T, Low breaking capacity, T1.6AL,
250V External fuse with UL/SEMKO rated holder
SUB10 Venture Series
4

Other manuals for JBL SUB10

Related product manuals