EasyManua.ls Logo

JBL SYNTHESIS SDP-40HD - Page 57

JBL SYNTHESIS SDP-40HD
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SDP-40HD Setup
3-17
Note:
When a dynamic mode (or mode that does not appear in the input setup
menu) is set as in the above example, the setting is retained even when
the SDP-40HD is set to standby.
2-CH
Opens the 2-CH MODE menu, to select a preferred listening mode
for 2-channel input sources. The SDP-40HD activates the preferred
listening mode whenever a new input is selected or a new
2-channel source is present.
When the 2-CH parameter is set to USE LAST:
The SDP-40HD uses the listening mode that was activated the
last time a 2-channel source was present.
The remote control 2 CH button toggles between the
2-CHANNEL listening mode and the previous listening mode,
and ignores the USE LAST setting. Instead, it uses the listening
mode (for example, L7 FILM) that was activated before the
2-CHANNEL listening mode.
The SDP-40HD will automatically activate a DTS NEO:6
listening mode if a DTS NEO:6 listening mode was activated the
last time a 2-channel source was present, and 44.1kHz or 48kHz
PCM digital source is present. Since the DTS NEO:6 listening
modes are dynamic, they cannot be selected as the preferred
listening mode for 2-channel sources.
D
Opens the DOLBY DIGITAL MODE menu, to select a preferred
listening mode for Dolby Digital input sources. The SDP-40HD
activates the preferred listening mode whenever a new input is
selected or a new Dolby Digital source is present.
When the D parameter is set to USE LAST:
The SDP-40HD uses the listening mode that was activated the
last time a Dolby Digital source was present.
If the THX MUSIC listening mode was activated the last time a
Dolby Digital source was present, then the THX MUSIC
listening mode is used. Since THX MUSIC is a dynamic listening
mode, it cannot be selected as the preferred listening mode for
Dolby Digital sources.
Opens the DTS(-ES) MODE menu, to select a preferred listening
mode for DTS(-ES) input sources. The SDP-40HD activates the
preferred listening mode whenever a new input is selected or a new
DTS(-ES) source is present.
When the DTS(-ES) parameter is set to USE LAST:
The SDP-40HD uses the listening mode that was activated the
last time a DTS(-ES) source was present.
The DTS(-ES) THX MUSIC listening mode is used if this listening
mode was activated the last time a DTS(-ES) source was
present. Since DTS(-ES) THX MUSIC is a dynamic listening
mode, it cannot be selected as the preferred listening mode for
DTS(-ES) sources.
INPUTSSETUP
DVD1
2-CH
INPUTSSETUP
DVD1
D
INPUTSSETUP
DVD1

Table of Contents

Related product manuals