Need help?Do you have a question about the JBL VRX918SP and is the answer not in the manual?
General| Power Rating | 1500 W Peak |
|---|---|
| Driver | 18 inch Differential Drive woofer |
| Input Connectors | XLR, 1/4" |
| Output Connectors | XLR with loop-through |
| Enclosure Material | Birch plywood |
| Dimensions | 508 mm x 597 mm x 749 mm (H x W x D) |
| Type | Self-powered subwoofer system |
Core safety instructions for operating and handling the apparatus.
Information on FCC and CSA compliance for the device.
Declaration detailing conformity with safety and EMC standards for DrivePack systems.
Guidelines for proper handling, placement, and environmental considerations.
Precautions for safely mounting speakers on stands or poles.
Warning about potential hearing damage from high sound pressure levels.
Introduction to the VRX932LAP powered, two-way, full-range line array speaker system.
Technical drawings showing the dimensions and specifications of the VRX932LAP.
Detailed technical specifications for the VRX932LAP loudspeaker system.
Diagram illustrating the internal signal flow and components of the VRX932LAP.
Introduction to the VRX918SP powered, 18-inch direct radiating subwoofer.
Technical drawings showing the dimensions and specifications of the VRX918SP subwoofer.
Detailed technical specifications for the VRX918SP powered subwoofer.
Diagram illustrating the internal signal flow and components of the VRX918SP.
Introduction to the JBL DrivePack DPC-2 integrated audio system technology.
Details on the signal processing and amplification unit within the DrivePack system.
Information on amplifier protection features and operating parameters.
Requirements for AC power supply and connectors for DrivePack systems.
Guidelines for creating custom AC power cable infrastructure for DrivePack systems.
Details AC power ratings and voltage selection procedure for DrivePack DPC-2.
Description of controls and indicator LEDs on the VRX932LAP input panel.
Details on the audio and AC power connectors found on the VRX932LAP input panel.
Description of controls and indicator LEDs on the VRX918SP input panel.
Details on the audio and AC power connectors found on the VRX918SP input panel.
Information on daisy-chaining audio signals between DrivePack systems.
Explanation of amplitude shading for shaping loudspeaker array coverage patterns.
Details on the ACS feature for adjusting HF output and array coverage.
Graphs showing frequency response variations based on ACS settings.
Example illustrating the application of ACS settings in a three-speaker array configuration.
Safety warnings and precautions for deploying systems using poles and tripods.
Guidance on deploying a single VRX932LAP on a tripod or pole over a subwoofer.
Instructions for deploying two VRX932LAP speakers together on a pole or tripod.
Procedure for mechanically securing two VRX932LAP loudspeakers together using rigging hardware.
Guidelines for inspecting and maintaining rigging hardware for safe suspension.
Advice and resources for individuals new to rigging speaker systems.
Requirements and considerations for attaching speaker systems to structural elements.
Table defining maximum speaker configurations for VRX array frames.
Step-by-step instructions for installing the VRX-AF array frame.
Methods for suspending VRX arrays in permanent installations using eyebolts or frames.
Guidelines for ground stacking VRX932LAP loudspeakers for upward firing applications.
Introduction to the VRX-AF array frame for suspending VRX932LAP and VRX918SP systems.
Information on the working load limit for the VRX-AF array frame and speaker configurations.
Technical drawings showing the dimensions and specifications of the VRX-AF array frame.
Details on who is protected by the JBL warranty and what it covers.
Information on obtaining warranty performance and contacting JBL for service.
To Next Page
